V1 le 22/04/23

https://www.stellarmate.com/products/stellarmate-os/for-mini-pc.html

===================================================================================
ACCES AU BIOS / BOOT OPTIONS
===================================================================================
F7 boot options
DEL BIOS

===================================================================================
INSTALATION DE L'IMAGE STELLARMATE  X
===================================================================================
Telechargement de StellarMateX_1.7.6.img.xz
validation de l'image avec Quick Hash GUI SHA256: d2215313b3b6b2cbe26ac1b5b8fea6adbae8cf81eb3eddcb294723d183010b78
OK

Installation
Download Rasbperry PI Imager and install it. 
  Il me demande une version de l'OS Rapery ???? je passe sur Rufus

J'utilise Rufus 3.2 : https://rufus.ie/fr/
  Peripherique : Clef USB
  Type de démarage : Image didisque ou iso
  SELECTION : StellarMateX_1.7.6.img.xz
  DEMARRER

Je suprime toute les partitions sur le disque de 250Go avec Acronis / ajouter un disque / GPT

Once the image is flashed to the USB thumb drive, insert the USB stick in your Mini PC and then power it up:
F7 pour booter sur la clef USB
After the StellarMate X or MiniPC reboots, it should start the restoration process using CloneZilla.
Select the target disk to install StellarMate X to. 
Warning! StellarMate X OS will take the full disk space. All data on the target disk WILL BE COMPETELY WIPED AND IS UNRECOVERABLE
You can not dual-boot or partition the installtion. The Mini PC should be fully dedicated to StellarMate X OS.
  le 2ieme est clairement le NVME Lexar de 2 To. Cela apparait dans son nom, donc notre installation WINDOWS
  Je prend le 1ER : mmcblk1 247GB ...
  OK
StellarMate X OS installation progress is displayed. Once completed, the Mini PC shall automatically shutdown.
  Démarage automatique de Partclone
  creation de partition et restauration de l'image automatique
  poweroff automatique

Remove the USB thumb stick from the Mini PC.

ATTENTION NE PAS CONNECTER LE CABLE RESEAU SUR LE MINI PC
  cela pause des problemes plus tard, l'appli Android ne decouvre pas le MINIPC

Power on the Mini PC, and if necessary, enter the BIOS again to change the Boot Option #1 to Ubuntu.
Il boot par defaut sur Windows
REBOOT avec la touche DEL pour entrer dans le BIOS
Avec les fleches du clavier : BIOS/Boot/Boot Option Priorities / Boot Option #1 + Enter
choisir ubuntu
BIOS / Save  & Exit
Save : Yes

Reboot the Mini PC and StellarMate X OS should load in about 30 seconds.
Passwords
The default StellarMate OS password is smate
The default StellarMate WiFi HotSpot password is stellar@mate

Je change le clavier par defaut dans Ubuntu avant tout setup stellarmate
System Settings / Input Devices  / Configure Layout / +Add  / French(AZERTY) / Move up

===================================================================================
CONTROLE A DISTANCE  SUR SMARTPHONE OU TABLETTE ANDROID
===================================================================================

Telechargement de l'appli StellarMate depuis le playstore

Registration
When using StellarMate App for the first time, you need to register your device, or sign in
using your existing stellarmate.com credentials:
1. StellarMate X: If you purchased an SM X or SM Pro device, you need to register the
device first before proceeding. Click on the Register button and then follow the on
screen guide.

Je  demare l'appli No devices detected run scanner / Have an existing account ? / Register a new device ?
Register new device : Register  if you have StellarMate X ou StellarMate PRO
Register a new device ? / Register
  astronomie
  antony
  astronomie.antony@gmail.com
  92160M31
  92160M31
NEXT
Il cherche a sbanner un QRCODE ???

Je recommence avec "Have an existing account"
  astronomie.antony
  92160M31
Message :
  Welcome
  Please make sure that you are ether connected to StellarMate's HotSpot or StellarMate is on the  same network as you are
  Click RESAN to begin scanning the network for StellrMate devices

Le mini PC est branché sur mon reseau domestique avec un cable RJ45. Je deconnecte le cable et reboot

Sur mon  smartphone je vois le reseau WIFI "stellarmate"
je me connecte avec stellar@mate  comme mot de passe

Depuis l'appli StellarMate j'utilis RESCAN en haut a droite
No device found ???
Je redemarre l'appli : KO
Je regarde qu'elle est mon IP sur le telephone: 10.250.250.84 
Sur Ubuntu : 10.250.250.1

Sur l'appli StellarMate 
  + Add a device / Manually Add Device / IP Address :10.250.250.1
  KO

Je relance une install sans ma connection au reseau local

REBOOT sur clef d'install et reinstallation

Sur le smartphone
  RESCAN et c'est OK

===================================================================================
BOOTER WINDOWS DEPUIS LINUX/STELLARMATE X
===================================================================================
Changer l'odre de boot depuis Ubuntu
Par  defaut on boot Stellarmate

https://doc.ubuntu-fr.org/efibootmgr
# efibootmgr -v
BootCurrent: 000B
Timeout: 2 seconds
BootOrder: 000B,0001,0009,000A,0000,0004
Boot0000* Windows Boot Manager	HD(1,GPT,384fb274-adb0-4ff4-9b9f-64a4228e82e9,0x800,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Windows Boot Manager	HD(1,GPT,384fb274-adb0-4ff4-9b9f-64a4228e82e9,0x800,0x32000)/File(\EFI\OEM\BOOT\BOOTMGFW.EFI)
Boot0004* UEFI: Built-in EFI Shell	VenMedia(5023b95c-db26-429b-a648-bd47664c8012)..BO
Boot0009* UEFI: PXE IPv4 Realtek PCIe GBE Family Controller	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(0039ced22322,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot000A* UEFI: PXE IPv6 Realtek PCIe GBE Family Controller	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(0039ced22322,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000B* ubuntu	HD(1,MBR,0x38fa9f77,0x800,0x100000)/File(\EFI\UBUNTU\SHIMX64.EFI)..BO

On BootCurrent: 000B => Boot000B* ubuntu	HD(1,MBR,0x38fa9f77,0x800,0x100000)/File(\EFI\UBUNTU\SHIMX64.EFI)..BO

pour Booter Windows en priorité
Si vous souhaitez ou vous devez modifier l'ordre d'amorçage des entrées UEFI , il suffit dans la commande suivante, 
de classer de la première à la dernière séparée d'une virgule les valeurs hexadécimales de chaque entrée UEFI disponible.

sudo efibootmgr -o 0000,0001,000B,0004,0009,000A
BootCurrent: 000B
Timeout: 2 seconds
BootOrder: 0000,0001,000B,0004,0009,000A
Boot0000* Windows Boot Manager	HD(1,GPT,384fb274-adb0-4ff4-9b9f-64a4228e82e9,0x800,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Windows Boot Manager	HD(1,GPT,384fb274-adb0-4ff4-9b9f-64a4228e82e9,0x800,0x32000)/File(\EFI\OEM\BOOT\BOOTMGFW.EFI)
Boot0004* UEFI: Built-in EFI Shell	VenMedia(5023b95c-db26-429b-a648-bd47664c8012)..BO
Boot0009* UEFI: PXE IPv4 Realtek PCIe GBE Family Controller	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(0039ced22322,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot000A* UEFI: PXE IPv6 Realtek PCIe GBE Family Controller	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(0039ced22322,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000B* ubuntu	HD(1,MBR,0x38fa9f77,0x800,0x100000)/File(\EFI\UBUNTU\SHIMX64.EFI)..BO

apres  reboot on boot windows et l'ordre de boot a changé  dans le BIOS